A、 Artificial feel used in flight control system, its direction is opposition to pilot’s movement.
B、 Artificial feel force is inversely proportional to the aerodynamic loads acting on the control surfaces.
C、 Artificial feel in aircraft flight control system is used in manual flight control of the aircraft.
答案：A
A、 Artificial feel used in flight control system, its direction is opposition to pilot’s movement.
B、 Artificial feel force is inversely proportional to the aerodynamic loads acting on the control surfaces.
C、 Artificial feel in aircraft flight control system is used in manual flight control of the aircraft.
答案：A
A. No matter which method is adopted, the form of any publication shall comply with GAMA and use the identical basic numbering system.
B. Regardless of method used, any publication conforming to the GAMA format will use the same basic numbering system.
C. In spite of method adopted, any publication will adopt the same basic numbering system complying with the GAMA format.
A. You shall know clearly that when the subject system or equipment is installed, the Pilot＇s Operating Handbook must always contain the related Supplement.
B. Apparently,the Supplement about the subject system or equipment, if installed, must be in the Pilot＇s Operating Handbook whenever applicable.
C. When the subject system or equipment is installed, you need to clearly identify the associated Supplement in the Plot＇s Operating Handbook at all times.
A. 如果超过50%的污染物造成孔堵塞,则要清理显示组件背面的孔。
B. 如果污染物造成孔堵塞超过50%,就要清洁显示组件后面的孔。
C. 如果50%的孔被污染物堵塞,则要清理显示组件底部的孔。
A. For normal operations, make sure the pressure relief valve is closed. An open pressure relief valve is a symptom of a problem in the fuel vent system.
B. For normal operations, make sure the shut off relief valve works; If you open pressure relief valve, that indicates a problem in the fuel vent system.
C. For normal operations, make sure you close the pressure relief valve. If you leave it open a problem will be shown in the fuel vent system.
A. Move the slat control lever to a unit position
B. Move the flap control lever to the 1 unit position
C. Move the flaperon control lever to the 1 unit position
A. Supervise the display of audio altimeter.
B. Monitor the media altitude meter display.
C. Monitor the radio altimeter indicator.
A. Do not use a material that is not the same to the material specified by the manufacture, a different material can cause damage to the equipment and can make the warranty unable to be applied.
B. Do not use a material that is not similar to the material provided by the manufacture, a material that is not similar can cause damage to the equipment and can make the warranty can celled.
C. Use a material that has equivalency with the material specified by the manufacture, other material can cause damage to the equipment and can make the warranty not effective.
A. Before you move the spoilers, tell all persons to get off the wings.
B. Before telling all persons to get off the wings, you move the ailerons.
C. Before you move the ailerons, tell all persons to get off the wings.
A. 在这些条件下,机械和电子螺距修剪系统将无法工作。
B. 在这些状况下,机构和电气横滚调整系统将不能运转。
C. 在这些情况下,机械和电气俯仰配平系统将不能工作。
A. 当控制手柄到DN位时,齿轮箱壳体会打开,齿轮松开并退出,壳体关闭。
B. 当控制手柄处于DN位置时,起落架舱门会打开,起落架解锁并伸出,然后舱门关闭。
C. 将控制手柄推到DN位置时,货舱门将打开,传动装置解锁可用,收回后则关闭。
