2674. 提供给客户的所有技术数据中的术语应保持一致

A. 用设置开关以重置运行时间。

B. 用重置按钮以重置运行时间。

C. 用重置按钮以重置格林威治时间。

A. When the movement of input rod is ranged from 5 to 10 mm, measure the piston retraction.

B. When the input lever is between 5 and 10 mm, measure the piston extension.

C. When the interval of input shaft changes between 5 and 10 mm, measure the expansion of the piston.

A. Clean the areas where there is hydraulic fluid leakage;

B. Clean the areas where there is hydraulic fluid seepage;

C. Clean the areas with wiper where there is hydraulic fluid leak;

A. 通常,当在章节末尾或出版物的后部增加页面不影响手册中的页面时-必须准备修订版。

B. 通常,当在章节一端或出版物的背面增加页面不影响手册中的页面时-必须随时准备修订版。

C. 通常,当在章节末尾或出版物的背面增加页面-不影响手册中已经存在的页面时-应随时准备修订版。

A. 补充发动机基本外形及其他已定义系统的功能。

B. 在基本发动机的外形中,用来定义发动机外部其他系统的功能。

C. 在基本发动机的外形内,用来补充发动机外部其他已定义系统的功能。

A. Remove the sleeve to tighten the sliding tube.

B. Remove the sleeve to install the sliding tube.

C. Remove the sleeve to free the sliding tube.

A. The mechanic will remove the fuel metering unit far away after he completes the trouble shooting.

B. The mechanic will remove the fuel metering unit at once after he completes the trouble shooting.

C. The mechanic will remove the fuel metering unit all right after he completes the trouble shooting.

A. ASSURE

B. MAKE SURE

C. ASCERTAIN

A. Do the leak test of the system.

B. Test the system for leaks.

C. Find the leaks of the sytem.

A. If the depth of a crack is 0.2 mm or less, reject the part.

B. If the width of a crack is more than 0.2 mm, reject the part.

C. If the depth of a crack is more than 0.2 mm, reject the part.