APP下载
首页
>
职业技能
>
设备系统操作理论翻译
搜索
设备系统操作理论翻译
题目内容
(
单选题
)
2681. Make sure that the door is flush with the adjacent surfaces

A、 确保舱门与其附近表面平齐。

B、 确保使用与舱门表面相似的材料对舱门进行打磨。

C、 确保舱门材料与其附近表面材料相同。

答案:A

设备系统操作理论翻译
1956. Remove the protective layer from one side of the new gasket with ANTENNA SIDE markings
https://www.shititong.cn/cha-kan/shiti/0009ffad-f681-8f01-c0b8-ef8d402da900.html
点击查看题目
1832. Without the modification, it is possible that the service life of this unit will be shorter than usual
https://www.shititong.cn/cha-kan/shiti/0009ffad-f67f-d648-c0b8-ef8d402da900.html
点击查看题目
618. Torque the plug to 6 Nm
https://www.shititong.cn/cha-kan/shiti/0009ffa7-3b3f-7336-c0b8-ef8d402da900.html
点击查看题目
2890. Most have attached dust caps that should be removed only for the actual fueling process and then immediately replaced
https://www.shititong.cn/cha-kan/shiti/0009ffb5-69d3-744d-c0b8-ef8d402da900.html
点击查看题目
1784. 文件必须易于修改。
https://www.shititong.cn/cha-kan/shiti/0009ffad-f67f-3c2d-c0b8-ef8d402da900.html
点击查看题目
2981. 检查洗手池排泄口、水龙头及其管路有无渗漏。
https://www.shititong.cn/cha-kan/shiti/0009ffb5-69d4-c370-c0b8-ef8d402da900.html
点击查看题目
1041. 确保驾驶舱头顶板上的探头加温电门放在自动位,所有的加温灯点亮。
https://www.shititong.cn/cha-kan/shiti/0009ffaa-70d1-ad89-c0b8-ef8d402da900.html
点击查看题目
1764. Loosen the screws that attach the clamp to the support
https://www.shititong.cn/cha-kan/shiti/0009ffad-f67e-f98e-c0b8-ef8d402da900.html
点击查看题目
1326. Though techniques such as shading, crosshatching, screening or similar means are recommended, the use of color is permissible
https://www.shititong.cn/cha-kan/shiti/0009ffaa-70d5-a075-c0b8-ef8d402da900.html
点击查看题目
1638. Propeller ‘s blade angle is the angle formed between the face of a propeller blade and its plane of rotation Blade angle is normally specifies at a particular blade station
https://www.shititong.cn/cha-kan/shiti/0009ffad-f67d-64e7-c0b8-ef8d402da900.html
点击查看题目
首页
>
职业技能
>
设备系统操作理论翻译
题目内容
(
单选题
)
手机预览
设备系统操作理论翻译

2681. Make sure that the door is flush with the adjacent surfaces

A、 确保舱门与其附近表面平齐。

B、 确保使用与舱门表面相似的材料对舱门进行打磨。

C、 确保舱门材料与其附近表面材料相同。

答案:A

设备系统操作理论翻译
相关题目
1956. Remove the protective layer from one side of the new gasket with ANTENNA SIDE markings

A. 从新垫圈上标有ANTENNA SIDE的一侧撕掉保护膜

B. 从标有ANTENNA SIDE记号的垫圈上撕掉保护膜

C. 从新垫圈一侧撕掉保护膜然后标记ANTENNA SIDE

https://www.shititong.cn/cha-kan/shiti/0009ffad-f681-8f01-c0b8-ef8d402da900.html
点击查看答案
1832. Without the modification, it is possible that the service life of this unit will be shorter than usual

A. The service life of this unit will be longer without the modification.

B. The service life of this unit will be longer with the modification.

C. The service life of this unit will be the same as usual with the modification.

https://www.shititong.cn/cha-kan/shiti/0009ffad-f67f-d648-c0b8-ef8d402da900.html
点击查看答案
618. Torque the plug to 6 Nm

A. 拧紧堵头至6牛顿

B. 给堵头磅力矩至6牛米。

C. 测量堵头紧力为6牛顿米。

https://www.shititong.cn/cha-kan/shiti/0009ffa7-3b3f-7336-c0b8-ef8d402da900.html
点击查看答案
2890. Most have attached dust caps that should be removed only for the actual fueling process and then immediately replaced

A. 大多数都带有堵盖,只有在实际加油过程中才能取下堵盖,然后立即更换。

B. 大多数都带有防尘盖,只有在实际加油过程中才能取下防尘盖,然后立即更换。

C. 大多数都带有防尘盖,只有在实施加油过程中才能取下防尘盖,然后更换。

https://www.shititong.cn/cha-kan/shiti/0009ffb5-69d3-744d-c0b8-ef8d402da900.html
点击查看答案
1784. 文件必须易于修改。

A. Documents must be temporarily edible.

B. Documents must be readily revisable.

C. Documents must be permanently durable.

https://www.shititong.cn/cha-kan/shiti/0009ffad-f67f-3c2d-c0b8-ef8d402da900.html
点击查看答案
2981. 检查洗手池排泄口、水龙头及其管路有无渗漏。

A. Check wash basin drains, water tap and its lines for leakage.

B. Inspect the washing sink, faucet and its pipe for leakage.

C. Examine the washing hand drain port,tap and the line for crack.

https://www.shititong.cn/cha-kan/shiti/0009ffb5-69d4-c370-c0b8-ef8d402da900.html
点击查看答案
1041. 确保驾驶舱头顶板上的探头加温电门放在自动位,所有的加温灯点亮。

A. In flight deck, once you set probe heater switches on the overhead panel automatically, all the heater lights flash.

B. Make sure probe heater switches on the overhead panel in flight deck are in AUTO position and all the heater lights illuminate.

C. Set probe heater switches on the overhead panel in cockpit in AUTO position so that all the heater lights come into view.

https://www.shititong.cn/cha-kan/shiti/0009ffaa-70d1-ad89-c0b8-ef8d402da900.html
点击查看答案
1764. Loosen the screws that attach the clamp to the support

A. 松开卡箍,将螺钉固定到支架上

B. 松开螺钉,将卡箍固定到支架上。

C. 松开将卡箍固定到支架上的螺钉。

https://www.shititong.cn/cha-kan/shiti/0009ffad-f67e-f98e-c0b8-ef8d402da900.html
点击查看答案
1326. Though techniques such as shading, crosshatching, screening or similar means are recommended, the use of color is permissible

A. 虽然建议使用诸如阴暗面、交叉区域、分隔符或类似的方法,但颜色的使用是符合规定的。

B. 虽然建议使用诸如斜线、交叉线、分栏符或类似的方法,但颜色的使用是允许的。

C. 虽然建议使用诸如阴影、交叉阴影、隔挡或类似的方法,但颜色的使用是允许的。

https://www.shititong.cn/cha-kan/shiti/0009ffaa-70d5-a075-c0b8-ef8d402da900.html
点击查看答案
1638. Propeller ‘s blade angle is the angle formed between the face of a propeller blade and its plane of rotation Blade angle is normally specifies at a particular blade station

A. the blade angle of propeller is the angle between blade face and rotation plane.

B. the blade angle of propeller is the angle between blade face and relative wind.

C. the blade angle of propeller is always acute angle no matter when the working status of the propeller.

https://www.shititong.cn/cha-kan/shiti/0009ffad-f67d-64e7-c0b8-ef8d402da900.html
点击查看答案
试题通小程序
试题通app下载