A、 shock absorbers is oleo-pneumatic
B、 shock absorbers is hydraulic-pneumatic
C、 shock absorbers is oil-air
答案:A
A、 shock absorbers is oleo-pneumatic
B、 shock absorbers is hydraulic-pneumatic
C、 shock absorbers is oil-air
答案:A
A. 确保舱门与其附近表面平齐。
B. 确保使用与舱门表面相似的材料对舱门进行打磨。
C. 确保舱门材料与其附近表面材料相同。
A. The Manufacture recommends that Buyer's qualified technicians inspect, troubleshoot test and repair or replace systems and components recommended by the Manufacturer that may be repairable o replaceable during normal maintenance procedures. The Manufacturer shall provide sufficient information in the Maintenance Manual and/or Maintenance data.
B. The Maintenance Manual and/or Maintenance Data provided by the manufacturer to the Purchaser shall contain enough information to enable qualified mechanics to inspect, troubleshoot test and repair or replace all systems and units that the Manufacturer regarded to be repairable or replaceable during normal maintenance procedures.
C. The Manufacturer shall provide the Purchaser with adequate information to enable the mechanics to do qualified work, such s to inspect troubleshoot test and repair or replace all systems and components that repairable or replaceable with reference to the Maintenance Manual and/or Maintenance Data ad required.
A. 在一块不需要承力的金属上,可以在某一点处切割一个直径为几英寸的孔,孔的周围用法兰连接,使其具有刚度
B. 在一块金属上,可以在不需要承力的某一点处切割一个直径为数英寸的孔,孔的边缘折边可以使其具有刚性
C. 在一块不需要承力的金属上,可以在一处切割几个直径为数英寸的孔,孔的边缘用凸缘连接,使其产生刚性
A. 修理后,不要用甲醇清洁这些部件
B. 修理后,不要用丙酮清洁这些部件
C. 修理后,不要用甲酮清洁这些零件
A. 系统的原理应当用图案阴影表示,并在管路上最少转动。
B. 系统的流程应当用图案阴影表示,并在管路上最少转动。
C. 系统的原理应当用图案阴影表示,并在管路上保持转动。
A. Write the temperature on the engine record card.
B. Record the temperature of the engine until writing it on the card.
C. Recording the temperature of the engine is done by writing it on the card.
A. If the pressure is above the limits, pressurize the accumulator of the door damper.
B. If the pressure is not in the given limits, pressure the cylinder of the door damper.
C. If the pressure is not in the given limits, pressurize the accumulator of the door damper.
A. 在APU运转过程中,如出现滑油渗漏,检查滑油温度传感器。
B. 在APU运转过程中,检查滑油温度传感器的滑油渗漏程度。
C. 在APU运转过程中,检查滑油温度传感器有无滑油渗漏迹象。
A. Put the lever in intermediate position;
B. Put the lever in intermittent position;
C. Put the lever in interfered position;
A. 不要在机库里进行这项程序
B. 不要在车间内进行这项程序
C. 不要在机坪上进行这项程序