A、 Fill the accumulator with oil;
B、 Recharge the accumulator with nitrogen;
C、 Release oil from the accumulator;
答案:A
A、 Fill the accumulator with oil;
B、 Recharge the accumulator with nitrogen;
C、 Release oil from the accumulator;
答案:A
A. 本规范是联邦航空管理局依据咨询通告AC 91-60制定的
B. 本规范反应了联邦航空管理局对咨询通告AC 91-60的要求
C. 本规范是根据联邦航空管理局的咨询通告AC 91-60制定的
D.
E.
F.
G.
H.
I.
J.
解析:
A. 把O形封圈浸泡在液压油里面。
B. 防止液压油腐蚀O形封圈。
C. 用液压油润滑O形封圈。
A. 饮用水系统用于存储和输送新鲜的饮用水;如果饮用水也用于洗涤,则包括洗涤水系统
B. 净水系统用于存储和输送新鲜的纯净水;如果纯净水也用于洗涤,则包括洗涤水系统
C. 饮用水系统用于存储或输送新鲜的饮用水;如果饮用水也用于洗涤,则包括洗涤水系统
A. Do not replace the self-locking nuts with plain nuts.
B. Do not use a general fastener instead of a self-locking one.
C. The general purpose nut is interchangeable with the self-locking nut.
A. When the target moves to or leaves the working area of the adjacent sensor,the electronic information of the adjacent sensor will be changed.
B. When the target moves into or out of the proximity-sensor's actuation area, it causes a change In the proximity sensor's electrical property.
C. When the target enters or leaves the active region of the adjacent sensor,the electronic signal of the adjacent sensor will be changed.
A. 确保该区域的设备都清空了。
B. 确保该区域的设备都清洁了。
C. 确保该区域那一台设备是完好的。
A. 本规范旨在为最初以12500磅或以下(或5700千克)最大起飞重量认证的所有类型通用航空飞机提供手册编制指南。
B. 本规范的制定是为手册编写提供规范性制导,用于12500磅(或5700千克)或以下最大起飞重量的所有类型飞机。
C. 本规范规定了以起始为12500磅或以下(或5700千克)最大起飞重量认证的所有类型通用航空飞机提供手指编制指导。
A. 燃油泵安装在隔板上部。
B. 燃油泵安装在隔板附近。
C. 燃油泵安装在隔板下部。
A. Do not stretch the seal when installing it.
B. Do not over-extend the seal when installing it.
C. Do not bend the seal when installing it.
A. 该程序应清楚地说明操作步骤,并以正确的工作流程按需接近并分步移除或安装软件
B. 该程序应按照逻辑工作流程顺序,按需清楚地描述逐步操作,以接近并随后移除或安装硬件
C. 该程序清晰地介绍了获取、移出或安装硬件所需的操作步骤,并且是按照正确的工作流程