A、 在APU运转过程中,如出现滑油渗漏,检查滑油温度传感器。
B、 在APU运转过程中,检查滑油温度传感器的滑油渗漏程度。
C、 在APU运转过程中,检查滑油温度传感器有无滑油渗漏迹象。
答案:C
A、 在APU运转过程中,如出现滑油渗漏,检查滑油温度传感器。
B、 在APU运转过程中,检查滑油温度传感器的滑油渗漏程度。
C、 在APU运转过程中,检查滑油温度传感器有无滑油渗漏迹象。
答案:C
A. Perform check to see if there are traces of corrosion around the drain holes.
B. Check the drain holes for signs of corrosion.
C. Check the area surrounding the drain holes for signs of contamination.
A. 完成步骤1到4,以确保没有轴向负荷施加在杆上。
B. 完成步骤1到4,以确保没有径向负荷施加在杆上。
C. 完成步骤1到4,以确保在杆上没有轮轴方向上的负载。
A. 建议执行人工修理。
B. 给出人工修理的建议。
C. 建议遵循修理手册执行工作。
A. 校准空速指示的是飞机速度,修正了位置和仪表误差;
B. 校准空速是指修正了位置和仪表误差后飞机的指示速度;
C. 校准空速是指飞机的指示速度,及被改过的位置和仪表误差;
A. Isolate the device that is faulty, and remove the failure;
B. Isolate the faulty device, and eliminate it from the section;
C. Isolate the unit that is at fault, and correct the cause of the trouble;
A. 用扭矩扳手拧紧螺母(再拧18)
B. 用力矩扳手拧紧螺母(少紧18)
C. 用扭矩扳手拧紧螺母(最少18)
A. 压力管分布在另一个方向上。
B. 压力管分布在相同的方向。
C. 压力管分布在不同的方向。
A. You do not need to give the return processes in its entirety unless you need to comprehend the system.
B. Unless you need to comprehend the system,do not need to fully show the return lines.
C. Return lines need not be shown completely if the system need not be realized.
A. 当在设定的周期内存在电子流,该电子流在设定的时间内重复,然后停止时,方波就会产生。
B. 方波是产生的,当有一段时间的电子流,停止一段时间,然后重复。
C. 当在设定的周期内存在电子流,该电子流在设定的时间内停止,然后重复时,方波就会产生。
A. If the part is broken, replace it.
B. If the part is unserviceable, replace it.
C. If the part condition is poor replace the.