2830. Soak the area with warm water

A. 温度传感器监控环境温度。

B. 温度传感器监控高温。

C. 温度计指示环境温度。

A. 拆除导线。

B. 合并导线。

C. 将导线分开。

A. 驾驶舱是指地板上方、前方乘客隔板和前方压力舱顶之间的舱室

B. 驾驶舱是指地板上方、前方乘客隔板之间以及前部压力舱顶上方的舱室

C. 驾驶舱是指地板前部、前方机组隔板和前方压力舱顶之间的舱室

A. 留在部件上的溶剂可能导致腐蚀。

B. 留在部件上的密封胶能够引起侵蚀。

C. 部件表面的颗粒可能引起磨损。

A. This section must provide the corresponding structural inspection procedures required for each mandatory replacement time, structural inspection interval and type qualification.

B. This section must list the relevant structural inspection procedures required for each mandatory replacement time, structural inspection interval and model qualification validation.

C. This section must set forth each mandatory replacement time, structural inspection interval, and related structural inspection procedure required for type certification.

A. Make sure that the tool is available in the following installation.

B. Make sure that the tool is subsequently available for the installation procedure.

C. Make sure that the tool is subsequently available for the installation procedure.

A. 请勿在不锈钢控制电缆上涂抹溶剂、油脂或油。 这些材料可能会积聚污染,从而对CRES电缆绞线的内表面造成损坏。

B. 请勿在不锈钢控制电缆上涂抹溶剂、油脂或油。 这些材料可能会积聚污染,从而对CRES电缆线束的内表面造成损坏。

C. 请勿在不锈钢控制电缆上涂抹溶剂、油脂或油。 这些材料可能会导电,从而对CRES电缆线束的内表面造成损坏。

A. Mix the bonding material with a spatula

B. Use the bonding material with a spatula

C. Put the bonding material with a spatula

A. Refer to the general information in addition to engine operation limits, guidelines and special procedures.

B. For general information, refer to engine operation limits, guidelines and special procedures.

C. Refer to engine operation limits, guidelines and special procedures besides general information.

A. There is different fuel load on each side of the aircraft centerline.

B. Avoid different fuel load on each side of the aircraft centerline.

C. Make sure that the fuel load on left side of the aircraft centerline is not same with the one on right side.