A、 确保夹钳的位置与您在拆卸过程中记录的位置一致
B、 确保夹钳的位置与您在拆卸过程中的位置齐平
C、 确保夹钳的方向与您在拆卸过程中的方向一致
答案：A
A、 确保夹钳的位置与您在拆卸过程中记录的位置一致
B、 确保夹钳的位置与您在拆卸过程中的位置齐平
C、 确保夹钳的方向与您在拆卸过程中的方向一致
答案：A
A. The temperature increase results in the tension decreasing in the cables.
B. The temperature increase affect slightly the tension in the cables.
C. The tension in the cables is a crucial factor in the temperature changes.
A. Dust can contaminate all areas.
B. Dusts are contamination of all filters.
C. Dust Can cause contamination on all filters.
A. The external diameter must be concentric to the internal diameter
B. The outer radius and the inner radius must be suitable.
C. The exterior radius must be installed on a common shaft with the interior radius.
A. 出现在基本维修手册中的系统/章节/部分中的线路图同时也在单独的线路图手册中出现。
B. 线路图可能出现在基本维修手册中的系统/章节/部分中或者在单独的线路图手册中出现。
C. 线路图出现在基本维修手册中的系统/章节/部分中和单独的线路图手册中出现。
A. 确保密封胶不会堵塞出口。
B. 确保密封胶不会堵塞排放。
C. 确保垫圈不会堵塞排放。
A. Such wires and cables should be disable of being coupled to the ground network of the aircraft electrical system
B. These wires and cables are capable to be connected to the aircraft electrical system ground network.
C. The connected wires and cables shall be attached to the ground network of the aircraft electrical system.
A. 确保正确安装轴承
B. 确保正确安装机轮
C. 正确的安装轴承
A. The airplane has been maintained according to ABC recommendations or equal standards;
B. The airplane has been maintained as recommended by ABC and its equivalent agency;
C. ABC recommends airplanes＇ owner to maintain airplanes;
A. When the light goes off, set the switch to NORMAL.
B. When the light is illuminated, move the switch to NORMAL.
C. When the light is extinguished, move the switch to NORMAL.
A. station shows the height along the fuselage between the reference datum and the position
B. station is the distance of a Point of fuselage to the location of reference datum along the
C. station means a position along the fuselage measured in inches from the reference datum
