A、 仔细检查组件来确定是否有进一步的损坏。
B、 目视检查组件来确定损坏的部位。
C、 目视检查组件来确定损坏的程度。
答案:C
A、 仔细检查组件来确定是否有进一步的损坏。
B、 目视检查组件来确定损坏的部位。
C、 目视检查组件来确定损坏的程度。
答案:C
A. When the indicator is visible, stop the pump.
B. When the indicator comes on stop the pump.
C. Stop the pump unless the indicator comes into view.
A. 在提升齿轮箱之前,先安装移动式起重机;
B. 先向上提起齿轮箱,再把可移动的钩子挂好;
C. 在提升齿轮箱之前,先把可移动的钩子挂好;
A. 放出适量燃油。
B. 注入大量的滑油。
C. 加入所需量的滑油。
A. 列出只是示例的技术名称。不需要列出所有可能的技术名称。
B. 列出的技术名称是唯一的示例。这个包括所有可能的技术名称列表并不完整
C. 列出的技术名称只是示例。该列表没有完整地列出所有可能的技术名称。
A. 以30度的幅度顺时针旋转调节器。
B. 以每次30度的增量,逆时针旋转调节器。
C. 逆时针旋转调节器,每次递减30度。
A. You can lead to ambiguous, if you use an imperative mood other than more sophisticated sentence type.
B. If you use a more complex sentence structure instead of an imperative, you can create vagueness.
C. If you use a more complicated types of sentence structure imperatively, you could lead to ambient.
A. Place mode select switch in REFUEL position.
B. Push mode switch in ON position.
C. Place joggle switch to REFUEL on position.
A. 每本手册都应有一份“飞机称重表格”,其中包括飞机剖面图,显示称重点的位置(使用顶升点或起落架)。
B. “飞机称重表格”应包含在每本手册中,其中包括飞机平面图,显示称重点相对基准线的位置(使用顶升点或底盘)。
C. 每本手册都应有一份“飞机称重表格”,其中包括飞机侧视图,显示称重点相对基准线的位置(使用顶升点或起落架)。
A. 对于仪表近进着陆,下滑道偏离用来建立足够的离地高度。
B. 对于目视近进着陆,下滑道偏离用来建立足够的进近高度。
C. 对于仪表近进着陆,航向道偏离用来建立足够的离地高度。
A. The bolt will be at the 2 o' clock position when you look at the pump from the rear.
B. The rivet is installed on the 2 o'clock position of the pump when looking from rear to front.
C. Look at the bolt installed on the pump from rear to front at the 2 o'clock position.