A、 The fault isolation work describes how to locate the fault. After you solve the fault, you may find “ The fault is corrected” shown on the screen.
B、 The fault isolation task tells the way to find the reason of the fault. When you find the words “You corrected the fault”, it means that the problem is solved.
C、 You could find the reason of the fault in the fault isolation steps. If the step indicates “ The fault is being corrected”, it means that you have finished the work.
答案:B
A、 The fault isolation work describes how to locate the fault. After you solve the fault, you may find “ The fault is corrected” shown on the screen.
B、 The fault isolation task tells the way to find the reason of the fault. When you find the words “You corrected the fault”, it means that the problem is solved.
C、 You could find the reason of the fault in the fault isolation steps. If the step indicates “ The fault is being corrected”, it means that you have finished the work.
答案:B
A. The word given in the approved examples is not controlled.
B. The word given in the approved examples is not mandatory.
C. The word given in the approved examples is not a must.
A. 每条指令用一句话写出,除非有两个或更多的动作。
B. 每句话仅写一条指令,除非有两个或更多的动作同时发生。
C. 每条指令除非有两个或更多的动作同时发生,否则仅用一句话写出。
A. In STE, a unit started with “topic sentence” is to instruct the main topic.
B. The “topic sentence” starts to tell the readers the topic of the paragraph in SET.
C. In STE, a paragraph starts with a “topic sentence” which tells the reader what the topic of that paragraph is.
A. Standardization will through uniform interpretation of inspection requirements in accord with this Specification contained in Continuing Airworthiness Programs prepared to enhance safety.
B. Standardization will enhance safety through uniform interpretation of inspection requirements contained in Continuing Airworthiness Programs prepared in accord with this specification.
C. Standardization will in accord with this Specification through uniform interpretation of inspection requirements contained in Continuing Airworthiness Programs prepared to enhance safety.
A. 需要时使用示意图来表明“流程” ,以尽可能简短的方式说明空气控制、电气、流体动力、燃油和涡轮系统的操作。
B. 必须使用示意图来来表明“流程”,以尽可能简洁的方式说明空气控制、电气、流体动力、燃油和涡轮系统的操作。
C. 必要时使用示意图来表明“流程”,以尽可能直接的方式说明空气控制、电气、流体动力、燃油和涡轮系统的操作。
A. Make sure that the brightness of the reticle light rapidly drops to zero.
B. Make sure that the intensity of the reticle light lessens radically to zero.
C. Make sure that the brightness of the reticle light is gradually reduced to zero.
A. It is permitted, if the local fire regulations and standards are more stringent than those regulations described in the following steps.
B. It is allowed, if the local fire codes and standards are more complicated than those legislations listed in the following steps.
C. It is possible that local fire protection regulations, and standards are necessary to be used more restrictive than those mentioned in the subsequent steps.
A. 如果获得一个以上的类别认证,则每一类别的重量均应给予限制。
B. 如果获得的认证多于一个类别,则每一类别的重量均须加以限制。
C. 如果在一个以上的类别中获得认证则各类别重量,连同任何相关限制,都应针对各类别给出。
A. Use the specified one if the equivalent material is not available.
B. Use the available equivalent one if no material is specified.
C. If you can not get the specified material, use an equivalent.
A. An annunciator device is displayed on the panel, which shows how it works.
B. If an annunciator panel is installed, explain how it operates.
C. If a display appears on the annunciator panel, it explains that how the system works.