A、 如果无法使用自动控制,请使用人工控制程序
B、 用手动程序代替自动控制程序完成操作
C、 尽可能使用手动程序替代自动控制
答案:A
A、 如果无法使用自动控制,请使用人工控制程序
B、 用手动程序代替自动控制程序完成操作
C、 尽可能使用手动程序替代自动控制
答案:A
A. 通过最少两个全循环操作副翼,并操作至其最大行程
B. 至少完整操作副翼两个全循环至其最大行程
C. 操作副翼最小两个单位,至其最大行程
A. shock loading of an engine may arise from a repeat landing.
B. shock loading of the engine can occur during a light landing.
C. shock loading of the engine can occur during a heavy landing.
A. If the valve is the source of the fuel leak, discard the valve seals and install new ones.
B. If the fuel leaks out of the valve, reinstall the valve seals.
C. If the fuel leak flows towards the valve, discard the valve seals and install new ones.
A. 用米尺来衡量金属盒的容识。
B. 评测金属规则的维度,来作长远的分级。
C. 用一个带有毫米刻度的金属尺来测量尺寸。
A. Use a hole instrument to examine the turbine internally.
B. Use a borescope to examine the combustor internally.
C. Use a hole instrument to examine the combustor externally.
A. 在某些情况下,导线是以颜色编码的,这些情况向在接线图上标明。
B. 在某些情况下,导线的颜色是喷涂上去的,在线路图上标出了。
C. 在某些情况下,线路图上会标出以颜色区分的导线分布情况。
A. 本规范第0.9部分要求的表格内容可以采用补充材料的日志(或清单)形式。
B. 本规范第0.9段要求的目录可以采用补充材料的日志(或清单)形式。
C. 本规范第0.9节要求,表格内容可以在补充材料的日志(或清单)中。
A. The thickness of the second coating layer must be 0.5mm and 0.6mm.
B. The coating thickness must be more than 0.5mm and less than 0.6mm.
C. The thickness of primer layer must be between 0.5 mm and 0.6 mm.
A. L1 entry door life vests were not installed by flight crew.
B. Life vests at L1 entry door flight crew station not install.
C. Life vests were not installed at L1 entry door flight crew station.
A. This material releases dangerous fumes when it touches hot surfaces.
B. On contact with hot surfaces, this material produces dangerous fumes.
C. This material happens dangerous gases when it comes into contact with hot surfaces.