3230. 三角形的底边是5cm。

A. The reader will understand the contents of your text and find important information quickly according to the above sentences.

B. The reader will understand the text contents and will find particular information quickly according to the above sentences.

C. It will be very difficult for the reader to understand the contents of your text and find specific information according to the top sentences.

A. 将飞机放回到通常停放位

B. 将飞机放回到初始位置

C. 将飞机恢复至初始构型

A. 本章节中所有部件的大修都必须根据部件制造商提供的数据,在符合条件的车间内完成。

B. 对本章中任何部件或所有部件进行的翻修必须依据部件制造商提供的数据在有资质的车间内完成。

C. 根据部件制造商提供的数据,在合格的车间内对任意或所有部件进行的大修必须包含在本章节。

A. The airworthiness section may recommend each expected replacement time.

B. The replacement time must be set forth in part of airworthiness section

C. Airworthiness section must set forth each mandatory replacement time.

A. 在填充氧气瓶时,必须强制遵守氧气瓶更换程序。

B. 在填充氧气瓶时,必须强制遵守氧气瓶安全操作程序。

C. 在填充氧气瓶时,必须强制遵守氧气瓶添充程序。

A. 该组件分配和过滤油液。

B. 该组件增压和过滤油液。

C. 该组件增压和旁通油液。

A. REPAIR or MODIFICATION can be found directly below the inspection procedure part, extending from left to right edge, listing repair or modification instructions and may refer to standard repairs in other documents, or special repairs or alternations defined elsewhere (e.g., service notices, service packs, etc.)

B. REPAIR or MODIFICATION is located directly under the inspection procedure section, extending from left margin to right margin of the page. Repair or modification instructions are stated in it and it may refer to standard repairs in another document, or special repairs or modifications clarified elsewhere (e.g., service kit, service bulletin, etc.)

C. REPAIR or MODIFICATION is positioned directly under the inspection procedure section, extending from left to right edge, describing repair or modification instructions and may use normative repairs in other documents, or special repairs or alterations dedicated elsewhere (e.g., service kit, service bulletin, etc.)

A. The cleaning/painting section shall provide information on materials and procedures musted to clean and paint one or more areas, and shall include safety precautions required to protect personnel and materials.

B. The cleaning/painting portion shall provide information as to material and procedure necessary to clean and paint an area or areas, and contain safety precautions necessary to protect personnel and material.

C. The cleaning/painting portion will provide to information to material and procedure necessary to clean and paint an area or areas, and contain safety precautions necessary to protect personnel and material.

A. Measure the vertical distance between the two parts.

B. Test the vertical clearance between the two components.

C. Measure the lateral distance between the two parts.

A. 球形轴承

B. 圆锥轴承

C. 圆柱轴承