3236. Production supervisor shall do the designated task in accordance with job cards

A. The data may be supplemented by brief descriptions of additional Characteristics or features if desired.

B. If necessary, the detail may supplement some simple descriptions of additional characteristics or properties.

C. If desired. The detail may be added by simple presentations of additional values or properties.

A. Multiple subsystems make up a system that pressurizes the tank to ensure water flow.

B. That portion of the system common to more than one subsystem which is used for pressurizing supply tanks to insure fluid flow.

C. A system consists of several subsystems that pressurize the tank to keep the water pressurized.

A. Fuel sample was checked for contamination of microorganism.

B. Contamination to microorganism was detected in the fuel sample.

C. Fuel sample check reveals positive contamination of microorganism growth.

A. Compare the width on the flange between points A and B.

B. Measure the distance on the flange at points A and B.

C. Test the length of points A and B on the flange.

A. 可以从ABC经销商或工厂客户服务代表处获得相应表格的副本和需要填写条目的说明。

B. ABC经销商或工厂客户服务代表处需获取相应表格的副本和需要填写条目的说明。

C. ABC经销商或工厂客户服务代表处必须提供相应表格的副本和需要填写条目的说明。

A. If a manufacturer elects to publish maintenance data in more than one volume, each separate volume shall be titled Wiring Diagram Manual, Component Maintenance Manual, etc., as appropriate.

B. If a manufacturer elects to publish maintenance data in more than one volume, each separate volume shall be titled System Diagram Manual, Component Maintenance Manual, etc., as appropriate.

C. If a manufacturer elects to publish maintenance data in more than one volume, each separate volume shall be titled Wiring Maintenance Manual, Component Maintenance Manual, etc., as appropriate.

A. Neither ASD, the Simplified Technical English Maintenance Group (STEMG), nor any organization or company associated with the production of STE intend or imply any warranty or endorsement to these organizations, companies, and individuals that give training or produce supporting software products.

B. ASD, the Simplified Technical English Maintenance Group (STEMG), and any organization or company associated with the production of STE, which intend or imply any warranty or endorsement to these organizations, companies, and individuals will not give training or produce supporting software products.

C. Neither ASD, or any organization or company associated with the production of STE intend or imply any warranty or endorsement to these organizations, companies, and individuals that give training or produce supporting software products.

A. Insert the pin of the apron service door security connector, then you can perform this procedure.

B. The ramp service door safety pin should be engaged until you start this procedure.

C. Firstly you should perform this procedure then you can engage the ramp service door safety connector pin.

A. Propeller governor is a device that adjusts the speed of the engine or propeller by increasing or decreasing the clearance of the propeller through the clearance changing mechanism on the propeller hub.

B. Propeller governor is the device that regulates the rpm of the engine or propeller by increasing or decreasing the propeller pitch, through a pitch change mechanism in the propeller hub.

C. Propeller governor is through the propeller hub of the propeller pitch changing machine, adjusts the speed of the propeller or engine by increasing or decreasing the propeller gap.

A. CAUTION: This test is to make sure that the flap position indicating system is in a zero condition.

B. NOTE: This test is to make sure that the flap position indicating system is in a zero condition.

C. NOTE: This tryout is to make sure that the flap position indicating system is in a zero energy state.